Summary
Volkswagen is on the machines with the steering gear pinion type. The steering is equipped with a progressive transfer, and secure the steering column. Steering wheel bearings go to rubber and reinforced straps for mounting. Shar-NCI driveshaft to the steering column marked by a certain number ¬ scrap, while the replacement is established to ¬ vat a shaft with the same number. Portions of steering we look a little further.
Dismantling and mounting
Note: The steering equipment is dismantled through the hole located on the left wheel arch, you will need to remove the wheel for more space.
Removal of steering:
1. Loosen the nuts on their own order of magnitude, located at the tips of steering rods and squeeze balls ¬ rovye fingers of the levers of steering a special puller.
2. Loosen both nuts themselves mounting bracket directly to the body.
3. Loosen the nuts and bolts universal joint, a nearby pinion steering mechanism.
4. Remove the steering bolts with glow type. If necessary, change these bolts, they can easily knock down.
5. Release the cardan joint on the front gear connections.
6. Remove the steering, across from ¬ vents, located in the arch of the wheel.
Installation of steering:
7. Enter the self steering mechanism through a specially ¬ from miles away, located right in the arch of the wheel.
8. Enter through the cardan joint shaft gears. Take care to ensure that the flattening gears are flush with the clamping bolt hole.
9. Score a clamping bolt, but not yet for ¬ tyagivayte it.
10 Replace steering control type glow plug screws, if necessary, with ¬ equate support of the rubber and put the mounting brackets. Nuts tighten straps criss-cross under a force equal to – 30 Nm. Nuts poryatsya independently and must be replaced if you feel that they are beginning screwed ¬ vatsya very easily.
11. Drag the clip-on bolt cardan hinge ¬ rated by applying a force of 30 Nm.
12. Attach the tie rods to the roaring din ¬ steering control. Tighten the nut Self-date, applying the amp ¬ e, equal to – 35 Nm.
13. When setting mechanisms ¬ ma steering is over – check out the descent and, if necessary, adjust these elements of the construction of steering.