To begin, consider the procedure for removing and installing fuel reserve sensor. Step One – disconnect the cable from the battery weight. Next, remove the rear seat, it is necessary for us to remove the transmitter cover fuel capacity. Disconnect the wiring from the sensor supply of fuel, and the socket mount on the back, so that it did not fall for tank cars.
Let us examine further the location of the fuel hose on the left is a green hose, which provides a supply of fuel in the engine compartment wiring harness connector located near the red hose – oil on it comes back. You need to disconnect the green and red hose from the pump, clog their ends so as not to spill a precious fuel … now look at the cover of the sensor supply of fuel and remember, as are the arrows. Next you need to unscrew the locking ring and remove it from the tank. Next you need to vynyat sensor box from the fuel tank, with care not to damage the lever. Check the rubber O-ring, if necessary, buy a new one. Sensor pointer fuel supply can only be purchased in full kit, spare parts separately you will not be sold.
Here is a step by step how to remove and install fuel bak.Snachala, of course, have to remove any fuel that is there. Next, disconnect the cable and battery weight. After removing the rear seat or rear seat cushion, disconnect the wiring from the sensor supply of fuel, attach this socket to the body. Next you need to disconnect the return and supply hose, lock the front wheels cars. Rear lift car with jacks, set the props. Disconnect the rear right wheel.
Next, remove the exhaust system of your car and insulation shield. Disconnect all hoses that lead from the fuel tank. The next step is prop tank with a jack, take a piece of board and put between them. Remove the bolts that attach the tank, remove the tubes, remove the tank from under the car. Before lowering the tank bend (only very carefully) brake pipe, this will provide sufficient clearance to vynyat tank from under the car.
In the case of a tank of water or sediment, it is necessary to remove the sensor supply of fuel and wash the tank with clean fuel. Please note that the tank is made of synthetic material, and in case of serious damage to him you have to buy a new tank, well, minor damage can be eliminated and myself.