In this article we will discuss the stages of body repair.
Step 1. If the car was defective due to mechanical shock or impact, you need to do straightening. In this process, the damaged surface should be leveled as to its original state, so that all of the following stages of work were not time-consuming and not cost-effective.
Step 2. After otrihtovki, the surface is aligned with putty. The process also has some features (different types of filler, the thickness of the layer deposited on the surface). Each artist, depending on their own qualifications, must choose their own approach to this phase of work.
Step 3. Wiping filler – this is done using special sticks and planers, which must be pre-attached sandpaper of different species. It should be noted that the use of proprietary tools and supplies at this stage of car repair can lead to quality work and will greatly facilitate the work podgotovschika.
Step 4. Drawing on the prepared surface of the part primer. Initially, the places where the surface remained open metal to cause anti-corrosion primer. Next you need to dry the piece and apply primer porozapolnitel. The next step is to cover the primer equalizer.
Step 5. Preparation or a separate auto parts for painting. You need to close those places that should not be painted. Further work surface to degrease and Blasting.
Step 6. Painting cars. Apply the paint to be very competent to be the most minimal amount of stains and debris.